View B72214P2131K101_8228917.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

siov metal oxide varistors leaded varistors, advanced-mp, s14 series series/type: b722* date: april 2011 ? epcos ag 2011. reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited.
construction round varistor element, leaded coating: epoxy resin, flame-retardant to ul 94 v-0 terminals: tinned copper wire features wide operating voltage range 130 ... 680 v rms all types duty cycle @ 6 kv/ 3 ka = >10 pulses, according to iec 60950-1 annex q; iec 61051-2 all types i nom @ 3 ka = >15 impulses according to ul 1449, 3 rd edition surge current generator (8/20 s), type 2 listed multiple pulse handling capability approvals ul csa vde iec delivery mode bulk (standard), taped versions on reel or in ammo pack upon request. for further details refer chapter "taping, packaging and lead configuration" for leaded varistors. general technical data climatic category to iec 60068-1 40/85/56 operating temperature to iec 61051 40 ... + 85 c storage temperature 40 ... +125 c electric strength to iec 61051 3 2.5 kv rms insulation resistance to iec 61051 3 100 m w response time < 25 ns leaded varistors b722* advanced-mp, s14 series page 2 of 22 please read cautions and warnings and important notes at the end of this document.
electrical specifications and ordering codes maximum ratings (t a = 85 c) ordering code type (untaped) siov- v rms v v dc v i max (8/20 s) a w max (2 ms) j p max w B72214P2131K101 s14k130e2k1 130 170 6000 60.0 0.60 b72214p2141k101 s14k140e2k1 140 180 6000 65.0 0.60 b72214p2151k101 s14k150e2k1 150 200 6000 70.0 0.60 b72214p2171k101 s14k175e2k1 175 225 6000 80.0 0.60 b72214p2211k101 s14k210e2k1 210 270 6000 95.0 0.60 b72214p2231k101 s14k230e2k1 230 300 6000 105.0 0.60 b72214p2251k101 s14k250e2k1 250 270 6000 115.0 0.60 b72214p2271k101 s14k275e2k1 275 350 6000 130.0 0.60 b72214p2301k101 s14k300e2k1 300 385 6000 140.0 0.60 b72214p2321k101 s14k320e2k1 320 420 6000 150.0 0.60 b72214p2351k101 s14k350e2k1 350 460 6000 165.0 0.60 b72214p2381k101 s14k385e2k1 385 505 6000 180.0 0.60 b72214p2421k101 s14k420e2k1 420 560 6000 190.0 0.60 b72214p2461k101 s14k460e2k1 460 615 6000 200.0 0.60 b72214p2511k101 s14k510e2k1 510 670 6000 200.0 0.60 b72214p2551k101 s14k550e2k1 550 745 6000 220.0 0.60 b72214p2621k101 s14k620e2k1 625 825 6000 240.0 0.60 b72214p2681k101 s14k680e2k1 680 895 6000 260.0 0.60 characteristics (t a = 25 c) ordering code type (untaped) siov- v v (1 ma) v d v v (1 ma) % v c,max (i c ) v i c a c typ (1 khz) pf B72214P2131K101 s14k130e2k1 205 10 340 50.0 1100 b72214p2141k101 s14k140e2k1 220 10 360 50.0 1000 b72214p2151k101 s14k150e2k1 240 10 395 50.0 900 b72214p2171k101 s14k175e2k1 270 10 455 50.0 800 b72214p2211k101 s14k210e2k1 330 10 545 50.0 690 b72214p2231k101 s14k230e2k1 360 10 595 50.0 630 b72214p2251k101 s14k250e2k1 390 10 650 50.0 580 b72214p2271k101 s14k275e2k1 430 10 710 50.0 530 b72214p2301k101 s14k300e2k1 470 10 775 50.0 485 b72214p2321k101 s14k320e2k1 510 10 840 50.0 445 b72214p2351k101 s14k350e2k1 560 10 910 50.0 410 b72214p2381k101 s14k385e2k1 620 10 1025 50.0 390 b72214p2421k101 s14k420e2k1 680 10 1120 50.0 355 b72214p2461k101 s14k460e2k1 750 10 1240 50.0 320 b72214p2511k101 s14k510e2k1 820 10 1355 50.0 300 b72214p2551k101 s14k550e2k1 910 10 1500 50.0 265 b72214p2621k101 s14k620e2k1 1000 10 1650 50.0 240 b72214p2681k101 s14k680e2k1 1100 10 1815 50.0 220 leaded varistors b722* advanced-mp, s14 series page 3 of 22 please read cautions and warnings and important notes at the end of this document.
dimensional drawings weight nominal diameter mm v rms v weight g 14 130 ... 680 1.8 ... 5.4 the weight of varistors in between these voltage classes can be interpolated. dimensions ordering code [e] 1 mm a 1 mm w max mm th max mm h max mm l min mm d 0.05 mm B72214P2131K101 7.5 2.0 16.0 4.7 20.0 25.0 0.8 b72214p2141k101 7.5 2.1 16.0 4.8 20.0 25.0 0.8 b72214p2151k101 7.5 2.2 16.0 4.9 20.0 25.0 0.8 b72214p2171k101 7.5 2.4 16.0 5.1 20.0 25.0 0.8 b72214p2211k101 7.5 2.7 16.0 5.4 20.0 25.0 0.8 b72214p2231k101 7.5 2.9 16.0 5.6 20.0 25.0 0.8 b72214p2251k101 7.5 3.0 16.0 5.7 20.0 25.0 0.8 b72214p2271k101 7.5 3.2 16.0 5.9 20.0 25.0 0.8 b72214p2301k101 7.5 3.5 16.0 6.1 20.0 25.0 0.8 b72214p2321k101 7.5 3.7 16.0 6.3 20.0 25.0 0.8 b72214p2351k101 7.5 4.1 16.5 6.7 20.5 25.0 0.8 b72214p2381k101 7.5 4.4 16.5 7.7 20.5 25.0 0.8 b72214p2421k101 7.5 4.7 16.5 8.2 20.5 25.0 0.8 b72214p2461k101 7.5 5.1 16.5 8.5 20.5 25.0 0.8 b72214p2511k101 7.5 5.4 17.0 8.9 21.0 25.0 0.8 b72214p2551k101 7.5 5.9 17.0 9.4 21.0 25.0 0.8 b72214p2621k101 7.5 6.4 17.0 9.9 21.0 25.0 0.8 b72214p2681k101 7.5 7.0 17.0 10.5 21.0 25.0 0.8 leaded varistors b722* advanced-mp, s14 series page 4 of 22 please read cautions and warnings and important notes at the end of this document.
reliability data test test methods/conditions requirement varistor voltage the voltage between two terminals with the specified measuring current applied is called v v (1 ma dc @ 0.2 ... 2 s). to meet the specified value clamping voltage the maximum voltage between two terminals with the specified standard impulse current (8/20 s) applied. to meet the specified value endurance at upper category temperature 1000 h at uct after having continuously applied the maximum allowable ac voltage at uct 2 c for 1000 h, the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. thereafter, the change of v v shall be measured. | d v/v (1 ma)| 10% surge current derating, 8/20 m s 10 surge currents (8/20 m s), unipolar, interval 30 s, amplitude corresponding to derating curve for 10 impulses at 20 m s | d v/v (1 ma)| 10% (measured in direction of surge current) no visible damage surge current derating, 2 ms 10 surge currents (2 ms), unipolar, interval 120 s, amplitude corresponding to derating curve for 10 impulses at 2 ms | d v/v (1 ma)| 10% (measured in direction of surge current) no visible damage electric strength iec 61051-1, test 4.9.2 metal balls method, 2500 v rms , 60 s the varistor is placed in a container holding 1.6 0.2 mm diameter metal balls such that only the terminations of the varistor are protruding. the specified voltage shall be applied between both terminals of the specimen connected together and the electrode inserted between the metal balls. no breakdown leaded varistors b722* advanced-mp, s14 series page 5 of 22 please read cautions and warnings and important notes at the end of this document.
test test methods/conditions requirement climatic sequence the specimen shall be subjected to: a) dry heat at uct, 16 h, iec 60068-2-2, test ba b) damp heat, 1st cycle: 55 c, 93% r. h., 24 h, iec 60068-2-30, test db c) cold, lct, 2 h, iec 60068-2-1, test aa d) damp heat, additional 5 cycles: 55 c/25 c, 93% r. h., 24 h/cycle, iec 60068-2-30, test db. then the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. thereafter, the change of v v shall be measured. thereafter, insulation resis- tance r ins shall be measured at v = 500 v. | d v/v (1 ma)| 10% r ins 3 100 m w rapid change of temperature iec 60068-2-14, test na, lct/uct, dwell time 30 min, 5 cycles | d v/v (1 ma)| 5% no visible damage damp heat, steady state iec 60068-2-78, test ca the specimen shall be subjected to 40 2 c, 90 to 95% r. h. for 56 days without load / with 10% of the maxi- mum continuous dc operating voltage v dc . then stored at room temperature and normal humidity for 1 to 2 h. thereafter, the change of v v shall be measured. thereafter, insulation resis- tance r ins shall be measured at v = 500 v (insulated varistors only). | d v/v (1 ma)| 10% r ins 3 100 m w leaded varistors b722* advanced-mp, s14 series page 6 of 22 please read cautions and warnings and important notes at the end of this document.
test test methods/conditions requirement solderability iec 60068-2-20, test ta, method 1 with modified conditions for lead-free solder alloys: 245 c, 3 s: after dipping the terminals to a depth of approximately 3 mm from the body in a soldering bath of 245 c for 3 s, the terminals shall be visually examined. the inspection shall be carried out under adequate light with normal eyesight or with the assistance of a magnifier capable of giving a magnification of 4 to 10 times. the dipped surface shall be covered with a smooth and bright solder coating with no more than small amounts of scattered imperfections such as pinholes or un-wetted or de-wetted areas. these imperfections shall not be concentrated in one area. resistance to soldering heat iec 60068-2-20, test tb, method 1a, 260 c, 10 s: each lead shall be dipped into a solder bath having a temperature of 260 5 c to a point 2.0 to 2.5 mm from the body of the specimen, be held there for 10 1 s and then be stored at room temperature and normal humidity for 1 to 2 h. the change of v v shall be measured and the specimen shall be visually examined. | d v/v (1 ma)| 5% no visible damage tensile strength iec 60068-2-21, test ua1 after gradually applying the force specified below and keeping the unit fixed for 10 s, the terminal shall be visually examined for any damage. force for wire diameter: 0.6 mm = 10 n 0.8 mm = 10 n 1.0 mm = 20 n | d v/v (1 ma)| 5% no break of solder joint, no wire break leaded varistors b722* advanced-mp, s14 series page 7 of 22 please read cautions and warnings and important notes at the end of this document.
test test methods/conditions requirement vibration iec 60068-2-6, test fc, method b4 | d v/v (1 ma)| 5% no visible damage frequency range: amplitude: duration: pulse: 10 ? 55 hz 0.75 mm or 98 m/s 2 6 h (3 2 h) sine wave after repeatedly applying a single harmonic vibration according to the table above. the change of v v shall be measured and the specimen shall be visually examined. bump iec 60068-2-29, test eb | d v/v (1 ma)| 5% no visible damage pulse duration: max. acceleration: number of bumps: pulse: 6 ms 400 m/s 2 4000 half sine fire hazard iec 60695-11-5 (needle flame test) severity: vertical 10 s 5 s max. note: uct = upper category temperature lct = lower category temperature r ins = insulation resistance leaded varistors b722* advanced-mp, s14 series page 8 of 22 please read cautions and warnings and important notes at the end of this document.
v/i characteristics v = f (i) - for explanation of the characteristics refer to "general technical information", 1.6.3 a = leakage current, b = protection level } for worst-case varistor tolerances siov-s14 ... e2k1 leaded varistors b722* advanced-mp, s14 series page 9 of 22 please read cautions and warnings and important notes at the end of this document.
derating curves maximum surge current i max = f (t r , pulse train) for explanation of the derating curves refer to "general technical information", section 1.8.1 siov-s14k130 ... k460e2k1 siov-s14k510 ... k680e2k1 leaded varistors b722* advanced-mp, s14 series page 10 of 22 please read cautions and warnings and important notes at the end of this document.
taping, packaging and lead configuration 1 epcos ordering code system for leaded varistors b722 10 s 2 271 k 1 0 1 monolithic varistor nominal disc diameter design: s = leaded varistor t = thermofuse f = fail-safe varistor q = energetiq series: 0 = standard 1 = automotive 2 = advanced 3 = superior 4 = superior max. ac operating voltage: 271 = 27 10 1 = 275 vac 140 = 14 10 0 = 14 vac 141 = 14 10 1 = 140 vac tolerance of varistor voltage: k = 10% j = 5% s = special tolerance lead configuration: 1 = straight leads 2 thru 5 = kinked form packaging: 0 = bulk, 1 thru 7 = taping style internal coding: 1 = standard leaded varistors b722* advanced-mp, s14 series page 11 of 22 please read cautions and warnings and important notes at the end of this document.
2 taping and packaging of leaded varistors tape packaging for lead spacing = 5 fully conforms to iec 60286-2, while for lead spacings = 7.5 and 10 the taping mode is based on this standard. 2.1 taping in accordance with iec 60286-2 for lead spacing 5.0 mm 2.2 taping based on iec 60286-2 for lead spacing 7.5 and 10 mm leaded varistors b722* advanced-mp, s14 series page 12 of 22 please read cautions and warnings and important notes at the end of this document.
2.3 tape dimensions (in mm) sym- bol = 5.0 tolerance = 7.5 tolerance = 10.0 tolerance remarks w max. max. max. see tables in each series th max. max. max. under "dimensions" d 0.6 0.05 0.8 0.05 1.0 0.05 p 0 12.7 0.3 12.7 1) 0.3 12.7 0.3 1 mm/20 sprocket holes p 1 3.85 0.7 8.95 0.8 7.7 0.8 f 5.0 +0.6/ 0.1 7.5 0.8 10.0 0.8 d h 0 2.0 depends on s depends on s measured at d p 0 1.3 0 2.0 0 2.0 top of compo- nent body w 18.0 0.5 18.0 0.5 18.0 0.5 w 0 5.5 min. 11.0 min. 11.0 min. peel-off force > 5 n w 1 9.0 0.5 9.0 +0.75/ 0.5 9.0 +0.75/ 0.5 w 2 3.0 max. 3.0 max. 3.0 max. h 18.0 +2.0/ 0 18.0 +2.0/ 0 18.0 +2.0/ 0 2) h 0 16.0 (18.0) 0.5 16.0 (18.0) 0.5 16.0 0.5 3) h 1 32.2 max. 45.0 max. 45.0 max. d 0 4.0 0.2 4.0 0.2 4.0 0.2 t 0.9 max. 0.9 max. 0.9 max. without lead l 11.0 max. 11.0 max. 11.0 max. l 4.0 max. 1) taping with p 0 = 15.0 mm upon request 2) applies only to uncrimped types 3) applies only to crimped types (h 0 = 18 upon request) leaded varistors b722* advanced-mp, s14 series page 13 of 22 please read cautions and warnings and important notes at the end of this document.
2.4 taping mode example: b72210s0271k1 5 1 | digit 14 digit 14 taping mode reel type seating plane height h 0 for crimped types mm seating plane height h for uncrimped types mm pitch distance p 0 mm 0 bulk 1 g i 16 18 12.7 2 g2 i 18 12.7 3 g3 ii 16 18 12.7 4 g4 ii 18 12.7 5 g5 iii 16 18 12.7 6 ga ammo pack 16 18 12.7 7 g2a ammo pack 18 12.7 internal coding for special taping g6 iii 18 12.7 g10 ii 16 18 15.0 g11 ii 18 15.0 g10a ammo pack 16 18 15.0 g11a ammo pack 18 15.0 leaded varistors b722* advanced-mp, s14 series page 14 of 22 please read cautions and warnings and important notes at the end of this document.
2.5 reel dimension dimensions (in mm) reel type d f n w i 360 max. 31 1 approx. 45 54 max. ii 360 max. 31 1 approx. 55 64 max. iii 500 max. 23 1 approx. 59 72 max. if reel type iii is not compatible with insertion equipment because of its large diameter, nominal disk diameter 10 mm and 14 mm can be supplied on reel ii upon request (taping mode g3). 2.6 ammo pack dimensions leaded varistors b722* advanced-mp, s14 series page 15 of 22 please read cautions and warnings and important notes at the end of this document.
3 lead configuration straight leads are standard for disk varistors. other lead configurations as crimp style or cus- tomer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. crimped leads (non-standard) are differently crimped for technical reasons; the individual crimp styles are denot- ed by consecutive numbers (s, s2 through s5) as shown in the dimensional drawings below. the crimp styles of the individual types can be seen from the type designation in the ordering ta- bles. 3.1 crimp style mode example: b72210s0271k 5 01 | digit 13 digit 13 of ordering code crimp style figure 1 standard, straight leads 1 2 s2 2 3 s3 3 4 s4 4 5 s5 5 available upon request internal coding 6 3.2 standard leads and non-standard crimp styles standard, straight leads non-standard, crimp style s2 non-standard, crimp style s3 figure 1 figure 2 figure 3 leaded varistors b722* advanced-mp, s14 series page 16 of 22 please read cautions and warnings and important notes at the end of this document.
non-standard, crimp style s4 non-standard, crimp style s5 figure 4 figure 5 3.3 component height (h max ) for crimped versions (non-standard) due to technical reasons the component height (h max ) increases if a crimp is added. the maxi- mum height of the crimped component can be found in the table below. nominal diameter mm v rms v crimp style mm h max mm 5 11 ... 175 s2 5.0 10.0 5 210 ... 460 s3 5.0 10.0 7 11 ... 175 s2 5.0 12.0 7 210 ... 460 s3 5.0 12.0 10 11 ... 300 s5 7.5 15.5 10 320 ... 460 s3/s5 7.5 16.5 10 510 s3/s5 7.5 17.5 10 automotive s5 7.5 17.0 10 automotive (d1 types) s5 7.5 16.0 10 11 ... 175 s4 5.0 16.5 10 210 ... 460 s3 5.0 16.5 14 11 ... 300 s5 7.5 20.0 14 320 ... 460 s3/s5 7.5 20.0 14 510 s3/s5 7.5 21.5 14 automotive s5 7.5 21.0 14 automotive (d1 types) s5 7.5 20.0 20 11 ... 320 s5 10.0 27.0 20 385 ... 510 s5 10.0 27.5 leaded varistors b722* advanced-mp, s14 series page 17 of 22 please read cautions and warnings and important notes at the end of this document.
3.4 trimmed leads (non-standard) varistors with cut leads available upon request. lead length tolerances: straight leads +/ 1.0 mm crimped leads +/ 0.8 mm minimum lead length 3.5 mm figure 6 leaded varistors b722* advanced-mp, s14 series page 18 of 22 please read cautions and warnings and important notes at the end of this document.
cautions and warnings general 1. epcos metal oxide varistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless oth- erwise agreed with epcos during the design-in-phase. 2. ensure suitability of siovs through reliability testing during the design-in phase. siovs should be evaluated taking into consideration worst-case conditions. 3. for applications of siovs in line-to-ground circuits based on various international and local standards there are restrictions existing or additional safety measures required. storage 1. store siovs only in original packaging. do not open the package before storage. 2. storage conditions in original packaging: storage temperature: 25 c ... +45 c, relative humidity: <75% annual average, <95% on maximum 30 days a year. dew precipitation: is to be avoided. 3. avoid contamination of an siov's during storage, handling and processing. 4. avoid storage of siovs in harmful environments that can affect the function during long-term operation (examples given under operation precautions). 5. the siov type series should be soldered within the time specified: siov-s, -q, -ls, -b, -sfs 24 months etfv 12 months. handling 1. siovs must not be dropped. 2. components must not be touched with bare hands. gloves are recommended. 3. avoid contamination of the surface of siov electrodes during handling, be careful of the sharp edge of siov electrodes. soldering (where applicable) 1. use rosin-type flux or non-activated flux. 2. insufficient preheating may cause ceramic cracks. 3. rapid cooling by dipping in solvent is not recommended. 4. complete removal of flux is recommended. leaded varistors b722* advanced-mp, s14 series page 19 of 22 please read cautions and warnings and important notes at the end of this document.
mounting 1. potting, sealing or adhesive compounds can produce chemical reactions in the siov ceramic that will degrade the component?s electrical characteristics. 2. overloading siovs may result in ruptured packages and expulsion of hot materials. for this reason siovs should be physically shielded from adjacent components. operation 1. use siovs only within the specified temperature operating range. 2. use siovs only within the specified voltage and current ranges. 3. environmental conditions must not harm siovs. use siovs only in normal atmospheric con- ditions. avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions.contact with any liquids and solvents should be prevented. leaded varistors b722* advanced-mp, s14 series page 20 of 22 please read cautions and warnings and important notes at the end of this document.
symbols and terms symbol term c capacitance c typ typical capacitance i current i c current at which v c, max is measured i leak leakage current i max maximum surge current (also termed peak current) i max maximum discharge current to iec 61643-1 i nom nominal discharge current to iec 61643-1 lct lower category temperature l typ typical inductance p max maximum average power dissipation r ins insulation resistance r min minimum resistance t a ambient temperature t r duration of equivalent rectangular wave uct upper category temperature v voltage v clamp clamping voltage v c, max maximum clamping voltage at specified current i c v dc dc operating voltage v jump maximum jump start voltage v max maximum voltage v op operating voltage v rms ac operating voltage, root-mean-square value v rms, op, max root-mean-square value of max. dc operating voltage incl. ripple current v surge super imposed surge voltage v v varistor voltage d v v tolerance of varistor voltage w ld maximum load dump w max maximum energy absorption lead spacing all dimensions are given in mm. the commas used in numerical values denote decimal points. leaded varistors b722* advanced-mp, s14 series page 21 of 22 please read cautions and warnings and important notes at the end of this document.
the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our ma- terial data sheets on the internet (www.epcos.com/material). should you have any more de- tailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "general terms of delivery for products and services in the electrical in- dustry" published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkk, mkd, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trade- marks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. important notes page 22 of 22

▲Up To Search▲

Price & Availability of B72214P2131K101

	To Download B72214P2131K101 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .